消火栓箱的用途及日常維護
來源：http://m.xintli.net/ 日期：2022-08-31
消火栓箱在我們生活中是非常普遍的，也是非常重要的防護設備，在各個建筑里都可以看到消火栓箱的身影。消火栓箱可以說是火災發生的時候滅火和逃生的主要工具，所以需要對消火栓箱進行日常的維護，下面
川消小編來為您講講。
Fire hydrant boxes are very common and important protective equipment in our life. Fire hydrant boxes can be seen in all buildings. The fire hydrant box can be said to be the main tool for extinguishing and escaping in the event of a fire. Therefore, it is necessary to carry out daily maintenance on the fire hydrant box. The following is a brief introduction by Chuanxiao Xiaobian.
川消消火栓箱的主要用途
Main uses of Chuanxiao fire hydrant box
消火栓箱是用來裝各種消防設備的地方，一般來說，消火栓箱的箱體都是用鋼材軋制而成，外部都是經過防銹漆或者是干燥處理，這樣才能確保消火栓箱的性，消火栓箱內配有室內消火栓，直流水槍軟管和軟管接頭以及消防按鈕等。
The fire hydrant box is used to install various fire-fighting equipment. Generally speaking, the box of the fire hydrant box is made of rolled steel, and the outside is subject to anti rust paint or drying treatment, so as to ensure the safety of the fire hydrant box. The fire hydrant box is equipped with indoor fire hydrant, DC water gun hose, hose connector and fire button.
目前室內的消火栓箱的外形都是非常美觀的，采用的都是單門雙門豪華組合箱結構，這樣非常便于使用，可以說它是高層或者是大型建筑工程以及公共場所發生火災之后撲滅火初期火災的有效消防設施。
At present, the appearance of indoor fire hydrant boxes is very beautiful, and the structure of single door and double door luxury combination box is adopted, which is very easy to use. It can be said that it is an effective fire extinguishing facility for high-rise or large-scale building projects and public places to extinguish the initial fire after a fire occurs.
目前的消火箱和滅火器都是由鋼板壓制而成的，他們的涂層表面都比較光滑，有很強的附著力，小伙，雅香采用的是新型的鋁合金框架，他的面板一般都是磨砂玻璃。
At present, the fire extinguisher and fire extinguisher are all made of steel plate. Their coating surfaces are smooth and have strong adhesion. Young man, Yaxiang uses a new aluminum alloy frame, and his panels are generally frosted glass.
消火栓箱的使用方法
Use method of fire hydrant box
消火栓箱的維護
Maintenance of fire hydrant box
1、在使用之后，一定要在水管完全干燥之后裝入消火栓內，而且水槍應該固定好，消火栓內應該保持干凈整潔，如果有破碎玻璃，應該及時更換。
1. After use, the water pipe must be installed in the fire hydrant after it is completely dry, and the water gun should be fixed. The fire hydrant should be kept clean and tidy. If there is broken glass, it should be replaced in time.
2、消火栓箱內部和正面一定要保持干燥和清潔，這樣才能有效地防止里面的軟管發霉，防止消防栓受到腐蝕。
2. The inside and front of the fire hydrant box must be kept dry and clean, so as to effectively prevent the hose inside from becoming moldy and prevent the fire hydrant from being corroded.
3、單位和個人應該定期對消防栓進行檢查和維護，要確保消防栓沒有泄露現象，確保閥門應用自如靈活，確保水槍和水龍帶完好無損，沒有任何剝落的現象。
3. Units and individuals shall regularly inspect and maintain the fire hydrants, ensure that there is no leakage of the fire hydrants, ensure that the valves can be applied freely and flexibly, and ensure that the water guns and hoses are intact without any peeling.
當火災發生的時候，要根據消火栓箱門的開啟方式，打開廂門，查一下水槍拉動軟管，同時要將軟管接口和消火栓接口連接起來，有拉動箱體內的電源開關，然后開啟方向旋松室內消火栓的手輪，這樣可以噴水滅火。以上所講希望對大家有一點幫助，更多了解關注我們
http://m.xintli.net！
In case of fire, open the door of the fire hydrant box according to the opening mode of the fire hydrant box door, check that the hose is pulled by the water gun, connect the hose interface with the fire hydrant interface, pull the power switch in the box, and then open the direction to loosen the hand wheel of the indoor fire hydrant, so as to spray water. I hope the above will help you a little, and learn more about us http://m.xintli.net ！
