自動消防水炮的特點以及安裝步驟
來源:http://m.xintli.net/ 日期:2022-10-06
自動消防水炮(亦稱智能消防水炮、大空間自動消防炮、自動掃描水炮)是集報警、滅火于一體的高科技消防產品,那么自動消防水炮的特點以及安裝步驟是怎樣的呢?下面
川消小編為您講解!
Automatic fire monitor (also known as intelligent fire monitor, large space automatic fire monitor, automatic scanning water monitor) is a high-tech fire protection product integrating alarm and fire fighting. What are the characteristics and installation steps of automatic fire monitor? Now let's talk about it!
自動消防水炮的特點
Features of automatic fire water monitor
自動消防水炮裝置具有主動探測火源、自動定位、自動對準著火點噴射水流進行滅火、滅火后復檢,確認火情滅失后自動恢復初始狀態的特點。
The automatic fire monitor device has the characteristics of actively detecting the fire source, automatically positioning, automatically aiming at the ignition point to spray water for fire extinguishing, rechecking after fire extinguishing, and automatically restoring the initial state after confirming the fire loss.
產品安裝方便,操作簡單,維護費用低維護簡單,滅火效率高,大程度地使火勢在起始階段就撲滅火災,具有很高的滅火效率。
The product is easy to install, simple to operate, low in maintenance cost, simple in maintenance, and high in fire extinguishing efficiency, which makes the fire extinguish at the initial stage to a large extent, and has high fire extinguishing efficiency.
本產品廣泛應用于、車站、機場、倉庫、廠房、體育館、禮堂、會展中心、賓館、停車場等室內大空間開闊或人流密集場所,可以及時時間控制火勢,防止火災蔓延。
This product is widely used in shopping malls, stations, airports, warehouses, factories, stadiums, auditoriums, exhibition centers, hotels, parking lots and other large indoor open spaces or crowded places, which can control the fire in time to prevent the spread of fire.

自動消防水炮安裝步驟
Installation steps of automatic fire water monitor
1.將自動滅火部件(自動消防水炮)的法蘭與系統管網上的法蘭對接,法蘭端面用水平尺調成水平;并通過4個螺栓固定;
1. Connect the flange of the automatic fire extinguishing component (automatic fire monitor) with the flange on the system pipe network, and adjust the flange end face to be horizontal with a level ruler; And fixed by 4 bolts;
2.調整引線長度,保證滅火裝置在轉動的范圍內無阻擋且不受引線長度限制;
2. Adjust the lead length to ensure that the fire extinguishing device is unobstructed within the rotation range and is not limited by the lead length;
3.連接電磁閥電源線;連接電源線,連接通信線,連接視頻線(如需)。
3. Connect the solenoid valve power line; Connect the power cable, communication cable and video cable (if necessary).
4.連接現場控制箱電源輸入,電源輸出,終端通信線,控制臺通信線(如有);
4. Connect the power input, power output, terminal communication line and console communication line of the field control box (if any);
5.安裝初步完成。檢查接線正確無誤,即可通過現場手動控制箱進行加電測試;
5. Installation is preliminarily completed. Check that the wiring is correct, and then conduct the power on test through the on-site manual control box;
6.加電后,現場控制箱手動指示燈點亮,通訊指示燈閃動,即表明和滅火部件接線正常;
6. After power on, the manual indicator of the field control box lights up and the communication indicator flashes, indicating that the connection with the fire extinguishing parts is normal;
7.控制電磁閥開啟閉合,如果電磁閥開啟閉合正常,表面電磁閥接線正常。
7. The control solenoid valve is opened and closed. If the solenoid valve is opened and closed normally, the surface solenoid valve wiring is normal.
8.自動消防水炮初步安裝完成。
8. The preliminary installation of automatic fire monitor has been completed.
The features and installation steps of the automatic fire water monitor are explained here. If you have any ideas about this, please come to our website at any time http://m.xintli.net Share and communicate!