自動消防水炮的探測優勢如何
來源：http://m.xintli.net/ 日期：2022-11-18
自動消防水炮也稱（自動跟蹤定位射流滅火裝置），其將紅外傳感技術、信號處理技術、通訊控制技術、計算機技術和機械傳動技術有機地結合在一起，能自動監測保護范圍內的火災。
川消小編為您講解更為詳細的內容。
The automatic fire water monitor is also called (automatic tracking and positioning jet extinguishing device). It combines infrared sensing technology, signal processing technology, communication control technology, computer technology and mechanical transmission technology organically, and can automatically monitor the fire within the protection range. Sichuan Xiaobian will explain more details for you.
一旦發生火災，滅火裝置立即啟動，對火源進行水平方向和垂直方向的智能掃描，確定火源的兩個方位后，控制器發出指令，發出火警信號，同時啟動水泵，打開閥門，滅火裝置對準火源進行射水滅火，火源撲滅后，控制器再發出指令停止射水。若有新的火源，滅火裝置將重復上述過程，待全部火源被撲滅后重新回到監控狀態。
In case of a fire, the fire extinguishing device will be started immediately, and the fire source will be scanned in the horizontal and vertical directions. After the two directions of the fire source are determined, the central controller will issue a command to send a fire alarm signal. At the same time, the water pump will be started, the valve will be opened, and the fire extinguishing device will aim at the fire source for water spraying to extinguish the fire. After the fire source is extinguished, the central controller will issue a command to stop water spraying. If there is a new fire source, the fire extinguishing device will repeat the above process and return to the monitoring state after all fire sources are extinguished.
1、采用雙波段紅外紫外復合探測技術，發現火情早、準確率高、范圍廣、無盲點；
1. The dual band infrared ultraviolet composite detection technology is adopted to find the fire early, with high accuracy, wide range and no blind spots;
2、可對火源位置進行定點、定位噴水滅火，撲滅早期火災效率高；
2. The fire source can be fixed at a fixed point and sprayed with water to extinguish the early fire with high efficiency;
3、現場可通過485總線手動控制滅火裝置噴嘴的射水方向；
3. The spray direction of the nozzle of the fire extinguishing device can be manually controlled on site through 485 bus;
4、采用總線制圖像傳輸技術，結合現場彩色圖像信號進行遠程人工手動控制；
4. The bus system image transmission technology is adopted to carry out remote manual control combining with on-site color image signals;
5、采用激光照射原理，可實現無需射水即可檢測滅火裝置射水是否準確；
5. The principle of laser irradiation can be used to detect whether the fire extinguishing device sprays water accurately without spraying water;
6、滿足國標規定的手動、自動及遠程手動三種控制方式；
6. Meet the three control modes of manual, automatic and remote manual specified in the national standard;
7、總線制通訊，耗材少，方便施工，維護簡單方便；
7. Bus system communication, less consumables, convenient construction and maintenance;
8、二次尋的、無需復位，大大縮短了滅火時間；
8. Second search, no need to reset, greatly reducing the fire fighting time;
9、可接收其他任何廠家的火災自動報警系統的聯動信號；
9. It can receive the linkage signal of the automatic fire alarm system from any other manufacturer;
10、重量輕，外形尺寸緊湊，大方美觀；
10. Light weight, compact size, generous and beautiful;
11、符合國標GB25204-2010《自動跟蹤定位射流滅火系統》的要求。
11. It meets the requirements of the national standard GB25204-2010 Automatic Tracking and Positioning Jet Fire Extinguishing System.
自動消防水炮的探測優勢如何？問題的相關內容在以上就給大家講解完畢了，您對此有什么相關的問題或者需求，都可以直接來我們網站
http://m.xintli.net進行咨詢吧！
What are the detection advantages of automatic fire water monitor? The relevant content of the question has been explained to everyone above. If you have any related questions or needs, you can come to our website directly http://m.xintli.net Consult!
