關于泡沫消火栓的特點以及使用方法
來源：http://m.xintli.net/ 日期：2023-02-22
消防產品里的泡沫消火栓是很重要的醫院，在消防設備中可以針對石油廠、油罐區等危險易燃易爆的液體進行撲滅火的任務。是泡沫滅火系統中的裝置之一，適用于大面積有火災危險的易燃液體和可燃液體的產生，貯存和使用場所。這款
川消泡沫消火栓主要是由法蘭、筒體、球閥、內接、消防管牙及端蓋所組成。泡沫消火栓適合裝備于石油化工企業、煉油廠、貯油罐區、飛機庫等重要場所。
The foam fire hydrant in fire protection products is a very important hospital. In the fire protection equipment, it can be used to extinguish the fire of dangerous flammable and explosive liquids such as oil plants and oil tank farms. It is one of the devices in the foam fire extinguishing system, and is suitable for the production, storage and use of large areas of flammable liquids and flammable liquids with fire hazards. This Chuanxiao foam fire hydrant is mainly composed of flange, cylinder, ball valve, internal connection, fire pipe thread and end cap. Foam fire hydrants are suitable for petrochemical enterprises, refineries, oil storage tank farms, aircraft hangars and other important places.
泡沫消火栓特點：
Features of foam hydrant:
快速開關、輕便，是在傳統消火栓的基礎上有了新的創造性的改進和提高，用下閥板密封，可以借助于介質自身具備的壓力密封，壓力越高密封越好，特別適用于泡沫消防線上，設計了良好的潤滑室：主要部件選用了高耐腐蝕材料、同時主要部件處于油箱內，始終能得到充分的潤滑。長時間不用、不保養也不會銹死、卡住。其泡沫混合液開關采用了不銹鋼球閥，保證開啟自如。
The quick switch and portability is a new creative improvement and enhancement on the basis of the traditional fire hydrant. With the help of the pressure seal provided by the medium itself, the higher the pressure, the better the seal. It is especially suitable for foam fire lines. A good lubrication chamber is designed: the main components are made of highly corrosion-resistant materials, and the main components are located in the oil tank, which can always be fully lubricated. It will not rust or get stuck if it is not used for a long time and not maintained. Its foam mixture switch adopts stainless steel ball valve to ensure free opening.
泡沫消火栓使用方法：
Use method of foam fire hydrant:
將滅火器提到距著火物6米左右，拔出保險銷，一手握住開啟壓把，另一只手緊握噴槍，用力捏緊開啟壓把，打開密封或刺穿儲氣瓶密封片，空氣泡沫即可從噴槍中噴出。滅火方法與化學泡沫滅火器相同。但與化學泡沫滅火器不同的是，空氣泡沫滅火器在使用時，滅火器應當是直立狀態的，不可顛倒或橫臥使用，否則會中斷噴射；也不能松開開啟壓把，否則也會中斷噴射。
Lift the fire extinguisher about 6 meters away from the object on fire, pull out the safety pin, hold the opening handle with one hand, hold the spray gun with the other hand, firmly hold the opening handle, open the seal or puncture the sealing sheet of the gas cylinder, and air foam can be ejected from the spray gun. The fire extinguishing method is the same as that of chemical foam extinguisher. However, unlike chemical foam extinguishers, when using air foam extinguishers, they should be upright and not used upside down or horizontally, otherwise the spraying will be interrupted; Do not loosen the opening handle, otherwise the injection will be interrupted.
Foam fire hydrants sincerely serve new and old users, strictly control the quality of products, do not dare to relax, do your own role, do your own products well, and come to our website if you have relevant doubts or needs http://m.xintli.net consulting service
