消防泵在消防事業中起著關重要的作用，關乎人命，所有消防泵的檢測是非常的嚴格的，在使用的時候，我們必須保持清醒的頭腦，當消防泵在使用中出現故障的時候，我們需要冷靜的考慮問題，下面川消小編簡單的給出幾點建議：

Fire pumps play a crucial role in the firefighting industry, which is related to human life. The testing of all fire pumps is very strict. When using them, we must maintain a clear mind. When a fire pump malfunctions during use, we need to calmly consider the problem. Below, Sichuan Xiaobian provides a few simple suggestions:

一、消防水泵都是有備用泵的，正當主泵發生故障的會自動切換到備用泵的。

1、 Fire pumps all have backup pumps, and if the main pump fails, it will automatically switch to the backup pump.

一般是漏水或者無法啟動。漏水可能是機械密封或者盤根出現問題。無法啟動可能是控制柜控制線路出現問題。法規要求消防泵都是要一用一備。作為消防系統的動力心臟，建議盡快找維修人員確定原因進行修復。

Generally, it is due to water leakage or inability to start. The leakage may be due to a problem with the mechanical seal or packing. Unable to start may be due to a problem with the control circuit of the control cabinet. The regulations require fire pumps to be one in use and one standby. As the power heart of the fire protection system, it is recommended to seek professional maintenance personnel as soon as possible to determine the cause and repair it.

二、對消防泵在使用過程中發現在葉輪安裝太小。

2、 During the use of the fire pump, it was found that the impeller was installed too small.

在進行檢查消防泵如果發現葉輪直徑太小，然后說這個機器上的葉輪不匹配，不在工作中產生良好的工作效率，所以一定要接觸到的消防泵廠家，然后可以更換葉輪，安裝在消防泵頂部的右葉輪。

If the diameter of the impeller is found to be too small during the inspection of the fire pump, and it is said that the impeller on this machine does not match and does not produce good work efficiency, it is necessary to contact the fire pump manufacturer before replacing the impeller and installing it on the right impeller at the top of the fire pump.

三、對消防泵在自動關機后發現一段時間的使用過程中

3、 During the use of the fire pump after automatic shutdown for a period of time

當這種現象出現在使用消防泵的過程中，你可能是葉輪堵塞，所以看到里面的葉輪是不是雜質的葉輪堵塞。

When this phenomenon occurs during the use of a fire pump, you may see that the impeller inside is blocked by impurities.

四、在消防泵在發現壓力表的位置，使用過程中不正確的

4、 The position of the pressure gauge was found to be incorrect during the use of the fire pump

當在使用時發現壓力表的位置是不正確的，那么我們要看一下自己的判斷是不是正確的，當壓力表確實是不尋常的話，那么他們就要檢查出口管道了。

When the position of the pressure gauge is found to be incorrect during use, we first need to check if our judgment is correct. If the pressure gauge is indeed unusual, they need to check the outlet pipeline.

另外重要的一點，就是及時聯系川消消防泵廠家售后，這是的處理方法。更多相關事項就來我們網站http://m.xintli.net咨詢!

Another important point is to promptly contact the after-sales service of the Sichuan Fire Pump manufacturer, which is a professional handling method. For more related matters, come to our website http://m.xintli.net consulting service