電控消防水炮怎么進行滅火？
來源：http://m.xintli.net/ 日期：2022-04-25
電控消防水炮本身并不具有火災探測系統，報警系統，不能實現自動定位的消防水炮，能通過控制器將消防水炮控制其動作。在噴水柱的同時，可以撲滅固體火；噴花水霧可以用來冷卻火場，滅火救援。
The electronically controlled fire water monitor itself does not have a fire detection system and alarm system. The fire water monitor that cannot realize automatic positioning can control its action through the controller. Solid fire can be put out while spraying water column; Spray water mist can be used to cool the fire site and put out fire and rescue.
電控消防水炮，采用直流電驅動，控制方式采用有線控制和無線遙控，使操作者可以直接控制水炮的射水角度，從而很好地保護滅火人員的人身。
The electric control fire water monitor adopts DC drive, and the control mode adopts wired control and wireless remote control, so that the operator can directly control the water injection angle of the water monitor, so as to protect the personal safety of fire fighters.
如現場工作人員不能控制消防炮進行滅火的情況。當火災發生后，當火災情況可控，火勢不大時，可利用消防炮無線遙控器將1、2門消防炮對準火點對準火點，開動電動閥和消防泵以實施滅火；如員工不能迅速取下遙控器，也可透過現場的手動控制箱，將1門或2門消防炮對準火點。
If the on-site staff cannot control the fire monitor to extinguish the fire. After the fire, when the fire situation is controllable and the fire is not serious, use the wireless remote control of fire monitor to align 1 and 2 fire monitors with the fire point, and start the electric valve and fire pump to extinguish the fire; If the employee cannot quickly remove the remote control, he can also aim one or two fire monitors at the fire point through the on-site manual control box.
起動電動閥和消防泵進行滅火。若現場有火情危險、火勢大、員工無法接近手動控制箱時，員工可前往消防控制中心。這就是電控水炮的有線控制和無線遙控滅火方式，當然如果大家還有不明白的地方，也可以咨詢威特消防廠家的技術人員來得到答案。
Start the electric valve and fire pump to extinguish the fire. If there is a fire danger on the site, the fire is large, and the employees cannot access the manual control box, the employees can go to the fire control center. This is the wired control and wireless remote control fire extinguishing method of the electric water monitor. Of course, if you still don't understand, you can also consult the technicians of Witt fire fighting manufacturer to get the answer.
正規消防產品表面及包裝應有清晰、耐久的標志，包括產品標志和質量檢驗標志(合格證)。
The surface and package of regular fire-fighting products shall have clear and durable marks, including product marks and quality inspection marks (certificate of conformity).
產品標志應包括制造廠名廠址、產品名稱、產品型號(規格)、主要技術系數、產品商標、生產日期及產品編號、執行標準代號。質量檢驗標志應包括檢驗員及合格標志。
The product mark shall include the name and address of the manufacturer, product name, product model (specification), main technical coefficient, product trademark, production date, product number and executive standard code. The quality inspection mark shall include inspector and qualification mark.
假冒偽劣產品外觀標志往往模糊粗糙，內容不全，不耐久。如假冒消火栓閥體上的商標鑄造模糊不清;接口上無規格型號標志;消防水帶不標"消防"二字，故意混淆等。
The appearance marks of fake and shoddy products are often vague and rough, incomplete and durable. If the trademark on the fake fire hydrant valve body is blurred; There is no specification and model mark on the interface; The fire hose is not marked with the word "fire" and is deliberately confused.
標識也是很重要的，工廠內的消防器材設備，常被其他物品遮住，這勢必延誤去用的時機，所以，在放置這些消防器材的地方，設立一個挑高的標志看板，來增加其能見度。還有一點要注意，就是要看看消防器材內的藥劑的有效期限是否逾期，而且，按時更新，確保滅火器的有效性。
Signs are also very important. The fire-fighting equipment in the factory is often covered by other items, which is bound to delay the time to use. Therefore, a high sign board shall be set up in the place where these fire-fighting equipment are placed to increase its visibility. Another point to pay attention to is to see whether the validity period of the agent in the fire-fighting equipment is overdue, and update it on time to ensure the effectiveness of the fire extinguisher.
The above is the wonderful content brought to you by today's Xiaobian. For more wonderful content, please click our website: Chuanxiao http://m.xintli.net
