川消半固定式泡沫滅火裝置使用及維護保養
來源：http://m.xintli.net/ 日期：2022-05-27
半固定式泡沫滅火裝置是一種新型的移動式泡沫滅火裝置，也稱移動式泡沫滅火裝置，操作快捷方便，可靠性強。那么半固定泡沫滅火裝置的使用方法以及它的維護保養內容是怎樣的呢？
Semi fixed foam fire extinguishing device is a new type of mobile foam fire extinguishing device, also known as mobile foam fire extinguishing device, which is fast, convenient and reliable. What is the use method and maintenance content of the semi fixed foam fire extinguishing device?
半固定式泡沫滅火裝置使用方法：
Use method of semi fixed foam fire extinguishing device:
設備一般應由兩人操作；一個人接在噴水槍帶上，持槍滅火，另一個人接在消火栓軟管上，打開消火栓球閥供水。操作步驟如下：
Generally, the equipment shall be operated by two persons; One person is connected to the sprinkler belt to put out the fire with a gun, and the other person is connected to the hose of the fire hydrant to open the ball valve of the fire hydrant to supply water. The operation steps are as follows:
用消防水帶將供水源與設備的壓力進水口連接起來；
Connect the water supply source with the pressure water inlet of the equipment with a fire hose;
拆下噴槍并展開其消防水帶；
Remove the spray gun and unfold its fire hose;
將噴槍的連接軟管與設備的出口VI連接起來；
Connect the connecting hose of the spray gun with the outlet VI of the equipment;
打開供水源：
Open the water supply source:
使用泡沫噴槍滅火。
Use a foam spray gun to extinguish the fire.
Maintenance of semi fixed foam fire extinguishing device of Chuanxiao:
1）滅火劑的罐裝：設備使用后，用戶必須購買同類型的泡沫液進行補充罐裝；裝罐時，可用塑料管吸入或用漏斗從注液口注入；裝罐后，擰緊注液口蓋,以防止移動設備時泡沫溢出。
1) Canning of fire extinguishing agent: after the equipment is used, the user must purchase the same type of foam liquid for supplementary canning; During canning, plastic pipe can be used for suction or funnel can be used for injection from the liquid injection port; After filling the tank, tighten the filler cap to prevent foam from overflowing when moving the equipment.
2)設備應放置在陰涼、通風、便于取用的地方。
2) The equipment shall be placed in a cool, ventilated and accessible place.
3）本設備罐體材料采用耐腐蝕玻璃鋼。嚴禁使用硬質工具敲擊或撞擊罐體，造成罐體損壞，造成液體泄漏。
3) The tank body of the equipment is made of corrosion-resistant FRP. It is strictly prohibited to use hard tools to knock or impact the tank, which will cause damage to the tank and liquid leakage.
4）如果設備長期不使用，應每年復查一次泡沫液質量是否變質。如發現變質，應及時更換。
4) If the equipment is not used for a long time, the quality of foam solution shall be rechecked once a year to see if it has deteriorated. If any deterioration is found, it shall be replaced in time.
5)設備每次使用后；在將消防水帶纏繞在設備卷盤上之前，應仔細清潔和干燥消防水帶。（建議用戶自備備用消防水帶，以防突發火災）。
5) After each use of the equipment; The fire hose shall be carefully cleaned and dried before being wound on the equipment reel. (it is recommended that the user should prepare standby fire hose to prevent sudden fire).
6）為了使設備長期處于良好的防火狀態和罐內泡沫液的質量；泡沫儲罐應每3年打開清洗一次。
6) In order to keep the equipment in a good fire prevention state for a long time and the quality of foam liquid in the tank; The foam storage tank shall be opened and cleaned every 3 years.
7）供水源為電動液壓泵或消防水罐車時，供水壓力不應大于1.0MPa。購買設備時，應配備能承受工作壓力≥1.0MPa的自勺式消防水帶。
7) When the water supply source is electric hydraulic pump or fire water tanker, the water supply pressure shall not be greater than 1.0MPa. When purchasing equipment, it shall be equipped with a self scoop type fire hose that can withstand a working pressure ≥ 1.0MPa.
半固定式泡沫滅火裝置使用及維護保養的相關內容便是這樣了，您可以關注川消網站
m.xintli.net，了解更多設備的使用。
This is the content related to the use and maintenance of the semi fixed foam fire extinguishing device. You can follow the website www.cx-fire Com to learn more about the use of devices.
