川消手抬機動消防泵引水困難怎么回事？
來源：http://m.xintli.net/ 日期：2023-01-07
手抬機動消防泵組整機由水泵、引水器、汽油或柴油發動機組成，具有引水結構緊湊、輕便等特點。手抬機動消防泵引水困難怎么回事？下面
川消小編為你講解一番。
The whole set of hand lift motor driven fire pump is composed of water pump, water diverter, gasoline or diesel engine, which has the characteristics of compact and light water diversion structure. Why is it difficult to carry the motorized fire pump to divert water? Now Chuanxiao will explain it to you.
1.吸水高度高于7米，降低吸收高度。
1. If the water absorption height is higher than 7m, reduce the absorption height.
2.吸水管濾堵塞，清理濾網。
2. The suction pipe filter is blocked, and the filter screen shall be cleaned.
3.吸水管密封膠圈損壞，更換密封膠圈。
3. If the sealing rubber ring of the suction pipe is damaged, replace it.
4.吸水管中部出現裂縫、洞空，更換吸水管急用可以將吸水管完全放入水中。
4. There are cracks and holes in the middle of the water suction pipe, and the water suction pipe can be completely put into the water when replacing the water suction pipe for emergency.
5.排水閥未關閉。關閉排水閥。
5. The drain valve is not closed. Close the drain valve.
6.真空泵潤滑油缺少，加注潤滑油。（注意：嚴禁無潤滑油使用真空泵吸收，嚴禁用水代替潤滑油）。
6. The vacuum pump is short of lubricating oil, so add lubricating oil. (Note: It is strictly prohibited to use vacuum pump to absorb without lubricating oil, and it is strictly prohibited to replace lubricating oil with water).
7.整機在使用過程中傾向高度不能超過15°，存放不得超過35°。
7. The inclination height of the whole machine during use shall not exceed 15 °, and the storage shall not exceed 35 °.
開機：啟動發動機，帶動水泵葉輪高速轉動，通過真空泵真空或者排氣式真空在≦30秒之間把水從進水管引入水泵，通過水泵葉輪的高數轉動產生壓力，再通過水泵出水口排水。有怎樣的需求就來我們網站
http://m.xintli.net看看吧！
Start up: start the engine to drive the pump impeller to rotate at a high speed, introduce water from the inlet pipe to the pump through the vacuum pump or exhaust type vacuum within ≤ 30 seconds, generate pressure through the high rotation of the pump impeller, and then discharge water through the pump outlet. Come to our website if you have any needs http://m.xintli.net Look!
