消防水炮在安裝過程中需要注意的事項
來源：http://m.xintli.net/ 日期：2023-02-28
1、消防水炮安裝支架必須穩固，安裝支架需要防震防晃動，消防水炮在轉動和噴水的時候不能晃動。
1. The mounting bracket of the fire water monitor must be stable. The mounting bracket must be shockproof and anti-shaking. The fire water monitor cannot shake when rotating and spraying water.
2、要嚴格執行國標規范，以方便后期通過消防驗收。
2. It is necessary to strictly implement the national standards and specifications to facilitate the later acceptance of fire control.
3、在安裝調試過程中消防水炮如果做出錯誤動作，應及時按下現場操作盤的急停按鈕，切斷電源，并查找原因。
3. If the fire water monitor makes wrong action during installation and commissioning, press the emergency stop button on the site operation panel in time, cut off the power supply and find out the cause.
4、在安裝調試現場，避免有強電磁場輻射，以及電氣焊或者明火作業，如不可避免，應將消防水炮系統切換手動狀態，并進行參數調整。
4. At the installation and commissioning site, avoid strong electromagnetic field radiation, electric welding or open fire operation. If it is unavoidable, switch the fire water monitor system to manual mode and adjust the parameters.
5、吊裝
川消消防水炮時，應妥善保護消防水炮炮頭傳感器，防止傳感器受損失靈。
5. When hoisting the fire water monitor of Sichuan Fire Fighting Company, the sensor of the fire water monitor head shall be properly protected to prevent the sensor from damage and failure.
6、消防水炮的線束在安裝后要整理整齊，并留有一定的余量，方便消防水炮轉動探測，線束在消防水炮轉動的時候不能產生摩擦現象。
6. The harness of the fire water monitor shall be tidy after installation, with a certain margin to facilitate the rotation detection of the fire water monitor. The harness shall not produce friction when the fire water monitor rotates.
如果我們不熟悉消防水炮相關組件功能和注意事項，貿然安裝，很容易造成消防水炮系統組件在安裝過程中受損，影響整個系統，導致安裝過程延長時間。在安裝過程中如果遇到其他問題，應及時和廠家技術人員進行溝通，在廠家技術員指導中進行消防水炮系統安裝。更多相關內容就來我們網站
http://m.xintli.net咨詢！
If we are not familiar with the functions and precautions of the relevant components of the fire water monitor and install it hastily, it is easy to cause damage to the components of the fire water monitor system during the installation process, affect the entire system, and prolong the installation process. In case of other problems during installation, timely communicate with the manufacturer's technicians and install the fire water monitor system under the guidance of the manufacturer's technicians. Come to our website for more relevant content http://m.xintli.net consulting service
